G-Cling 70 Sunstrip 1pc

G-Cling 70 Sunstrip 1pc

rearsidewindow_2pcs

G-Cling 70 Rear Side 2 Windows -Installation Kit Included-

G-Cling 70 Front Side 2 Windows -Installation Kit Included-

High-Performance Static Cling Window Film Front Side 2 Windows
Installation kit included

73% of Visible Light Transmission (27% Light Blocked) 
85% of IR (Infrared) Blocked
99.9% of UV (Ultraviolet) Blocked

Size: 17 x 20 inches
Color: Pale Blue
3 Year Warranty

$14.99
Availability: In stock
SKU
C70C-1

3 Simple Installation Steps.

Installation steps

Step 1. Spray. After cleaning the window, spray it and spray the film on both sides.

Step 2. Apply. Place either side of the film, as straight as possible, to the window.

Step 3. Squeegee Start to squeegee the solution from under the film. Apply firm pressure to ensure no bubbles or solution is left under the film. The installation is done. 

What is G-Cling Window Film?

G-Cling window film is a Greenfilm's static cling window film series. Static cling window film adhesive on the glass by atmospheric pressure. Which means it's a no-glue window film, and no sticky mess or bubbles after installing. It's the most suitable product for the first-time window film installer. Our manufacturing process makes our flexible window tint thinner and lighter meaning it doesn’t fall off as easy reducing headaches and problems when installing.

Note

An installation tool kit is included with this order.
Kit includes: spray bottle, tint-on solution, squeegee, knife, fabric, and gasket push stick.

  

G-cling vs. Traditional Adhesive Tints

1. No Bubbles



Our G-cling windows film does not have glue, therefore no bubbles will occur even years after installation. There are a few reasons bubbles form under traditional tints. The first most important reason is the low quality of the adhesive. The second is improper installation. The third is the low quality of the installation solution. Low-end tints will normally form bubbles within a few years after installation.

2. Error-Free Installation



Our installation process is error-free. Unlike traditional films, our g-cling can be easily removed after applying to remove any dirt or to easily readjust the film. Since traditional films contain glue, it is extremely difficult to remove any debris that is left under the film after installation.

3. Removable & Reusable



There is no extra cost for removing! Since our films don't contain glue, they can easily be removed and re-installed or rolled and stored away until you are ready to re-install. This makes it suitable if you are renting a car and don't want to pay for removing the tint. Traditional films can cost around $100 for removal. Removing tint with glue can also leave behind a sticky mess that can damage your windows. They can also not be reused after removing.

4. Lower Cost 



There is no need to pay a high installation fee or to find time to take your vehicle to a tint shop. Our films can be easily installed yourself which will save you time and money. Traditional films need to be installed professionally. This means paying hundreds on fees and having your vehicle in a tint shop for hours.

5. No Heat Gun Needed



Our films are static cling. They do not require a heat gun for installation. All that is required is our installation solution. Traditional films require a heat gun for installation.

Choose the right VLT (visible light transmittance).

products

specs achart

*Tint laws vary by state. Check out your state's laws on our blog here.  


G-Cling 70: High-Performance Energy Saving Window Tint Film

G-Cling 70 is a high-performance static cling window tint film designed for high visible light. It is designed to block heat and UV while still maintaining the view from your window. 
This film allows 73% of visible light transmitted blocks 85% of heat and 99.9% of UV rays. For those that want to maintain the view but can't stand the heat, or if you want to keep the UV rays away from your family, our g-Cling 70 energy-saving films will be your best option!


G-Cling 20, 10, 5: Privacy & Glare Reduce Static Cling Window Tint Film

G-Cling 20, G-Cling 10 and G-Cling 5 are our static cling window tint films designed for privacy and sun glare purposes.
The film blocks a good amount of visible light from the outside. It keeps the inside private and also reduces the light glare if you have direct light coming through the window. For those of us that would like some privacy, without completely blocking the view, this is the solution!




6 Piece Installation Took Kit Included: 

installation tool kit

Tool Kit Includes:
1x Spray Bottle
1x Gasket Push Stick
1x Concentrated Solution
1x Towel
1x Small Yellow Squeegee
1x Cutting Knife 


Took Kit Features:tool kit features

1. Concentrated Solution

This solution has a Ph of 7 +/- 0.5 which will not damage the film or burn your hands.

2. Spray Bottle

Spray bottle for easily spraying "tint-on" solution onto the window and film.

3. Small Yellow Squeegee

Small Yellow squeegee for effortlessly removing air bubbles and solution from under the film.  

4. Gasket Stick & Yellow Squeegee

Used together for inserting the edges of the film into the window seal.